|
Dual Band Low Frequency
& Microwave Active RFID Tag
|
Model:
59071 |
☺ |
125KHz |
☺ |
2.4GHz |
☺ |
3V Battery |
Features
-
On-board
dual frequency antennas of 125 KHz and 2.4 GHz
-
48bits Unique
hardware ID
-
Capability to setup alarms
on a tag-by-tag basis: Low Battery, Location, Duress and
Tamper
-
Custom design
options on requests for directly
adjacent to diverse sensors, e.g,
temperature sensor
-
Low power consumption,
2 years battery lifecycle
Overview
Conventional RFID (radio frequency
identification) systems operating at one single carrier
frequency can hardly handle the great variety of shapes and
materials that occur in products and packaging,
that is why Shanghai Tigon Intelligence Technology contributes
this dual band LF
/ MW active RFID tag
(59071) to better fit
your tracking applications
within complex industrial environments in a cost effective way.
An
example of operations for
rea-time tracking of assets and
personnel throughout a facility would be likely as:
-
Tags are awakened by a 125
KHz signal received from a transmitter or
”Activator”. Embedded in the activation signal is
the Activator’s unique location code.
-
The tag then responds
by transmitting both the location code and it’s
pre-programmed tag ID at 2.4 GHz signal
This “Dual Frequency”
operation, combined with randomized response delays,
allows both the activation and transmission activities
to occur simultaneously such that multiple tags can be
awakened and read at the same time. The low frequency
signal also helps improve noise immunity and allows
signals to penetrate non-metallic materials such as
clothes, briefcases, glass, drywall, etc.
The
circuit board is available for OEM purpose, which could be
easily mounted on or inside any OEM's product due to its small
size. Generally using this
tag can save hundreds of hours of development time
compared with designing custom modules especially when
considering RF performances.
Specification
|
Low
Frequency (LF) |
|
|
|
Frequency |
125 kHz |
|
Active
Range (Typical) |
2 m |
|
Data
Rate |
2Kbps |
|
Microwave （MW） |
|
|
|
Frequency |
2.4 GHz |
|
Active
Range |
200 m
(Open space)
100 m (Heavy metal) |
|
Data
Rate |
250Kbps |
|
Air
Protocol |
IEEE802.15.4 2003 |
|
Operation |
|
| |
Beacon |
Enable/Disable via LF Receiver
Adjustable beacon rate of 0.5 sec. to 10 hr. |
|
Response
to Reader |
Tag
returns ID, status, Activator ID, other information
recorded by Activator, to Reader upon entering Activator
field and periodically while tag remains in Activator
field. |
|
Multi-tag Collection |
100 |
|
Unique
ID |
6 Bytes |
|
Non-volatile Memory |
Internal
Flash 16KBytes |
|
Battery
Life |
2 years
@ (3 read events per day, beacon rate of once per 5
seconds) |
|
Battery
Type |
3V
lithium, 610 mAh, replaceable |
|
Battery
status indicate (Optional) |
Every
beacon and reader response |
|
Operating Temperature |
-20°C to
+ 60°C |
|
Operating Humidity |
25-90%
RH @ 50 DegC, non-condensing |
|
Protection |
On
requests |
|
Approval |
CE, RoHS |
|
Weight |
50g |
|
Dimension (L*W*H) |
7.5cm*5.4cm*1.7cm |
Price
|
Order Code |
Description |
Unit Price (USD)* |
|
59071-1 |
Dual Band LF 125K Hz
Microwave 2.4G Hz Active RFID Tag Circuit Board for OEM |
12.90 |
|
59071-2 |
Dual Band LF 125K Hz
Microwave 2.4G Hz Active RFID Tag with Commerical Grade
Encapsulation |
Contact Us |
|
59071-3 |
Dual Band LF 125K Hz
Microwave 2.4G Hz Active RFID Tag with Industrial Grade
Encapsulation |
Contact Us |
* Minimum Order Amount May Applied
Low Frequency
RFID Activator
|
Model:
59078 |
☺ |
125KHz |
☺ |
Ethernet |
☺ |
EIA485 |
☺ |
EIA232 |
☺ |
12Vdc |
Features
-
Desirable for working
in heavy metal or liquid environment
-
Adjustable, well-defined range
enables coverage of dock doors and other portals without
unintentional cross-reads
-
Fully configurable
operation, including data transfer to tags, enabling /
disabling of tag beacon, and adjustment of tag operating
parameters
-
Fully networked and
supports firmware download and self diagnostics
-
Custom design
options on requests for directly
adjacent to diverse sensors, e.g., occupancy sensor, or I/O
devices
-
Rugged, weather-proof
packaging available for indoor and outdoor uses
-
Low power consumption
Overview
The Activator (59078) is a
network-capable transmitter that connects directly to an
application-specific antenna to provide a low frequency
activation signal that awakens tags as they pass through
the antenna's field. The Activator writes its location
ID as well as additional informations that operators
input to the tag, which is then re-transmitted, along
with the tag's unique ID, to provide the tag's precise
location at the time of activation.
Through Ethernet connectivitiy, Any number of readers
can be networked, communicating
with readers, controllers, host
applications and maybe each other, throughout
multiple facilities to enable enterprise-wide monitoring
and tracking of assets, personnel and other
mission-critical resources.
A few antennas options are
available for different cases, such as Road Loop Antenna,
Plex-Bollard Antenna, Picture Frame Antenna, Ceiling Antenna,
Flex Under-Carpet Antenna, etc as shown below.
By adjusting the power output on the Activator, the
activation area can be expanded or reduced, thus creating
control points from a few feet in diameter to tens of feet
across.
Each activator
owns a unique 48bits hardware ID as
well and can be configured with its user-defined
location ID via Ethernet or its serial port,
restricted by access security level of operators.
The unit installs easily and offers flexible coverage
for perimeter doors, interior zones, vehicle lanes and
other control points throughout the facility.
The
Activator circuit board is available for
OEM purpose,
which could be easily mounted on or inside any OEM's
product. Generally using this module can save hundreds of hours of development time
compared with designing custom ones.
Specification
|
Modulation |
On-Off-Keying |
|
Low
Frequency Transmitter |
125 KHz |
|
Bandwidth |
8 KHz |
|
Radio
range (Typical) |
2 m
depending on orientation |
|
Data
Rate |
2 Kbps |
|
Activate
moving Speed |
40 Km/h |
|
Communication |
Ethernet
(Modbus TCP) |
|
Data
Link |
|
|
|
RS485 |
Modbus
Serial, for synchronization |
|
|
RS232 |
Modbus
Serial, for configuration and set up |
|
Online
Upgrade Support |
Yes |
|
Power
Supply |
12 VDC |
|
Power
consumption |
240 mA |
|
Operating Temperature |
-20°C to
+ 60°C |
|
Operating Humidity |
25-90%
RH @ 50 DegC, non-condensing |
|
Protection |
On
requests |
|
Approval |
CE, RoHS |
|
Weight |
390g |
|
Circuit Board
Dimension (L*W*H) |
40cm*40cm*5cm |
Price
|
Order Code |
Description |
Unit Price (USD)* |
|
59078-1 |
Low Frequency 125K Hz
RFID Activator Circuit Board for OEM |
99.90 |
|
59078-2 |
Low Frequency 125K Hz
RFID Activator with Commerical Grade
Encapsulation |
Contact Us |
|
59078-3 |
Low Frequency 125K Hz
RFID Activator with Industrial Grade
Encapsulation |
Contact Us |
* Minimum Order Amount May Applied
Microwave RFID Reader
|
Model:
59079 |
☺ |
2.4GHz |
☺ |
Ethernet |
☺ |
EIA485 |
☺ |
EIA232 |
☺ |
12Vdc |
Features
-
Long-range and fast
communication enables effective monitoring of
hundreds of tagged items over out of sight radius -
ideal for yards, terminals, and warehouses
-
Modbus TCP protocol provides
interoperability with other data collection devices,
including bar code scanners and other RFID readers
-
Custom design
options on requests for directly
adjacent to diverse sensors, e.g.,
occupancy sensor or I/O devices
-
Seamless interface to
Manufacturing Enterprise Platform and applications
-
Rugged, weather-proof
packaging available for indoor and outdoor use
-
Low power consumption
Overview
RFID
Reader (59079) is a network-capable
general-purpose receiver that detects tag signals,
converts them into data, and forwards the information to
activators, controllers
or host applications. Any
number of readers can be
networked throughout multiple facilities to enable
enterprise-wide monitoring and tracking of assets,
personnel and other mission-critical resources.
The reader
processes and filters information received from any tag,
whether automatically activated via Activator
(59078), or when triggered by a beacon timer,
sensor or alarm event. Tag transmissions can be received
at a distance of about
200m in a
typical office environment, with greater
distances up to 500m
achievable in open air, line-of-sight applications.
The
reader can be configured and controlled
locally or remotely
via RS-232 serial port
or Ethernet
Modbus TCP network communications.
Each reader
owns a unique 48bits hardware ID as well.
The RFID reader circuit board is available for OEM purpose,
which could be easily mounted on or inside any OEM's product.
Generally using this module can save hundreds of hours of
development time compared with designing custom ones.
Specification
|
Modulation |
OQPSK |
|
Microwave Transceiver |
2.4GHz |
|
Bandwidth |
80 MHz |
|
Radio
range (Typical) |
200 m
(Open space)
100 m (Heavy metal) |
|
Data
Rate |
250 Kbps |
|
Transmit
Power |
2 mW |
|
Sensitivity |
-101 dBM |
|
IF
Frequency |
2 MHz |
|
IF
Bandwidth |
2 MHz |
|
Air
Protocol |
IEEE
802.15.4 (Zigbee) |
|
Communication |
Ethernet
(Modbus TCP) |
|
Data
Link |
|
|
|
RS485 |
Modbus
Serial, for synchronization |
|
|
RS232 |
Modbus
Serial, for configuration and set up |
|
Self
Diagnostics Support |
Yes |
|
Online
Upgrade Support |
Yes |
|
Non-volatile Memory |
Internal
Flash 128 Kbytes
SPI Flash 256 Kbytes |
|
Power
Supply |
12 VDC |
|
Power
consumption |
240 mA |
|
Operating Temperature |
-20°C to
+ 60°C |
|
Operating Humidity |
25-90%
RH @ 50 DegC, non-condensing |
|
Protection |
On
requests |
|
Approval |
CE, RoHS |
|
Weight |
390g |
|
Circuit Board
Dimension (L*W*H) |
40cm*40cm*5cm |
Price
|
Order Code |
Description |
Unit Price (USD)* |
|
59079-1 |
2.4G Hz RFID Reader Circuit Board for OEM |
99.90 |
|
59079-2 |
2.4G Hz RFID Reader with Commerical Grade
Encapsulation |
Contact Us |
|
59079-3 |
2.4G Hz RFID Reader with Industrial Grade
Encapsulation |
Contact Us |
* Minimum Order Amount May Applied
Solutions
and Applications
People Tracking & Evacuation System
A innovative soultion
integrates our dual-band Active RFID system based access
control, people & asset location and tracking, digital
survillence system with cameras, as well as our SafeGuarderTM
system which broadcasts variable volume and frequency sounds to
guide people evacuate with human factors considered and advanced
control algorithms embedded of emergency evacuation route
caluation. Contact
us for technical details with your specific needs and
partnerships are welcome
Manufacturing Work-In-Process
It is
typical
application of our dual bands active RFID
system in discrete manufacturing industry to save time, improve
quality and reduce cost, based on benefits from a) Direct
record of production and quality data on the product from
assembly line to distribution center; b)
Full cycle visibility by real-time data moving with
parts; c) Easily integrated with standard
MES/ERP or even SCADA systems, etc.
For more details, please
contact us.
Next Page >>
Other Product Lines from TiGon
Universal Industrial Controller
| Network I/O | Gateway |
Network Infrastructure | OEM
Modules | Sensor & Field Devices
LonWorks Product
| I/O Modules | Router & Gateway | Interfaces | Network Infrastructure | OEM
Modules | Access & Security Controls | HVAC Controls | Lighting Controls |
Network Management Software | Network Monitoring | Sensor & Field Devices
Need more functionalities or features?
>> We are fully aware that each case has its
unique needs or requirements, please contact us so that we could
assist you in finding best solution...
|
