Shanghai TiGon Intelligence Technology Co.,Ltd.
Your Automation Controller Specialist
 
About Us
   
 
LonWorks Product - Control Module LonWorks World

 

FTT 32K Flash Generic Control Module

Model: 52114

TP/FT-10

Flash

 

Features

  • On-board Neuron FT3150 Smart Transceiver (or TMPN3150 and FTT-10A), 32Kbyte Flash

  • Differential Manchester encoded signaling for polarity-insensitive network wiring

  • Transformer-isolation

  • 78 kilobits per second

  • Distances up to 500 meters worst case in free topology

  • Local event processing

  • Common form factor makes control modules interchangeable

  • Low power consumption

  • Compact Design

Overview

FTT Generic Control Module (52114) is a very cost effective way to add LonWorks communication to your embedded design. It may be used as standalone board or with host MCU and ShortStack firmware.

The small size of the control module permits it to be mounted on or inside an OEM's product, directly adjacent to the sensors, outputs, or displays that the module will control. It is also a ideal choice to replace legacy LonWorks control modules when manufacturers do not support anymore.

Using this control module can save hundreds of hours of development time compared with designing custom modules. The control modules can be integrated into a product with minimal additional safety testing.

Specification

Microprocessor

Neuron FT3150 or TMPN3150

Transceiver Type

FT-X1

Transceiver Bit Rate

78kbps

Crystal Oscillator Clock

10MHz (5MHz optional)

Memory

64 KB Flash

Data Communication Type

Transformer-isolated twisted pair

Isolation Between Network and I/O Connectors

0-60Hz ( 60 seconds ): 1000VRMS

0-60Hz ( continuous ): 277VRMS

Typical Supply Current

25mA receive, 40mA transmit

Maximum Nodes Per Channel

64 (-40 to + 85DegC)

Network Wiring

22 to 16AWG twisted pair

Network Length in Free Topology

<1000m maximum total wire with one repeater

<500m maximum total wire with no repeaters

<500m maximum node-node distance with no repeater

Network Length in Doubly-Terminated Bus Topology

up to 2700m worst case

Maximum Stub Length in Doubly-Terminated Bus Topology

3m

Network Bus Polarity

Polarity insensitive

Power-down Bus Protection

High impedance when unpowered

Supply Voltage

5V+/-5%

I/O Connector

2*9 on 2.54mm centers

Network Connector

One terminator in free topology, two terminators in doubly-terminated bus topology

Operating Temperature

-40 to +85 DegC

Non-operating Temperature

-40 to +85 DegC

Operating Humidity

25-90% RH @ 50 DegC, non-condensing

Non-operating Humidity

95% RH @ 50 DegC, non-condensing

Dimensions

L61mm x W41mm x H15mm

Connectors

18-Pin I/O (P1)

6-Pin Network (P2)

Function

Pin

N/C

1

IO0

2

GND

3

IO1

4

GND

5

IO2

6

GND

7

IO3

8

~RESET

9

IO4

10

IO5

11

+5V

12

IO6

13

IO9

14

IO7

15

IO10

16

IO8

17

~SERVICE

18

Function

Pin

N/C

1,2,5,6

DATAB

3

DATAA

4

Special Offer

Unit Price: Euro 35.90

Other Related Products

FT3150 Control Module 52004

FT5000 Control Module 52124

Generic Core Module 53011

 

 

Shanghai TiGon Intelligence Technology Co.,Ltd. Copyright @2015-2020
Address: Caohejing Hi-Tech Park, Shanghai 200233, P.R.China
Tel/Fax: 86-21-6470-4009 Email:
sales@stitcs.com