|
FTT LonWorks Repeater
|
Model:
11981 |
☺ |
TP/FT-10 |
☺ |
24VDC |
Features
-
FTT-10/10A physical layer
repeater
-
Extends/doubles wiring
distance of LonWorks Networks
-
Low cost alternative to
routers configured as repeaters
-
Isolates network traffic
-
Improves performance and
reliability of network
-
5MHz clock input
-
Low power consumption
-
Compact Design, DIN Rail
mounting
Overview
This repeater
(11981) is a two channel physical layer repeater for use with
FTT-10/10A devices, data received on one channel is
reconditioned and re-transmitted on the other channel, enable
extension of LonWorks network beyond 64 nodes limit and improve
performance and reliability of LonWorks network. Segment length
is also extended depending on the topology used.
No
configuration software is needed. The repeater could be
installed easily, plug and play.
A red LED
indicates when power is applied.
Specification
|
LonWorks |
|
Transceiver Type |
Side A
and B: FTT-10A |
|
Transceiver Bit Rate |
78kbps |
|
Topology |
Bus or
Free, Single-ended or Double-ended |
|
Data
Communication Type |
Transformer-isolated Twisted Pair |
|
Network
Wiring |
22 to
16AWG Twisted Pair |
|
Transmission (Network Length) |
Doubly-Terminated Bus Topology:
Up
to 2700m
Free
Topology: 500m |
|
Nodes
per Segment |
64 |
|
General |
|
Supply
Voltage |
24VDC
(18-32VDC) |
|
Power
Consumption |
<1.5W |
|
Isolation |
1000VRMS |
|
Operating Temperature |
0 to +70
DegC |
|
Non-operating Temperature |
-40 to
+85 DegC |
|
Operating Humidity |
10-90%
RH @ 50 DegC, non-condensing |
|
Non-operating Humidity |
95% RH @
50 DegC, non-condensing |
|
Dimensions |
L100mm x
W22.5mm x H112mm |
|
Weight |
approx.
120g |
|
Protection |
IP20 |
|
Installation |
DIN-rail
Mounting |
|
Certification |
CE, RoHS |
Configuration
Special Offer
Unit Price:
Euro 129.00
Other Related Products
Twisted Pair LonWorks Router 10981
|
